Description
Gator Seal Wet Look (1 Gal)
PICK UP ONLY
- Solvent-based Sealer
- High gloss
- For dry cast concrete pavers
Coverage
1 Gallon = 170 sq feet
PLEASE NOTE
- Concrete pavers should only be sealed 60 days after their installation date. Consult concrete paver manufacturers for their recommendation
- Concrete pavers and jointing sand MUST be 100% dry.
- Temperature should be between 60°F (16°C) and 85°F (29°C) when sealer is applied.
- Concrete paver surface must be cool to the touch when sealer is applied (between 60°F (16°C) and 85°F (29°C)).
- First clean concrete pavers with Gator Clean products. Remove all oil, grease and rust stains.
- Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
- Use just one (1) layer of sealer.
- When using GATOR SEAL WET LOOK assure yourself at least 48 hours of dry conditions prior to applying the sealer.
- Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer.
- Wear protective gloves, eye protection and respiratory protection.
- This sealer is to be employed without thinning or diluting under normal environmental conditions. Use acetone for cleaning. Alliance Designer Products shall not be liable for any non-compliant use.
Additional Information
- Delivery is available within RI. See the Delivery Info page for details.